| Step | | Procedure & Parts & Tools |
| 1 |
|
LOCATE YELLOW CAP ON SOLUTION FILTER
|
| 2 |
|
TURN CAP AND PULL TO REMOVE SOLUTION FILTER
|
| 3 |
|
REMOVE THE 2 SCREWS HOLDING SOLENOID VALVE ASSEMBLY TO MACHINE
| Screwdriver-phillips |
|
|
| 4 |
|
PULL THE SOLENOID VALVE ASSEMBLY THRU WALL OF MACHINE
|
| 5 |
|
PULL THE SOLENOID VALVE ASSEMBLY FROM UNDER THE MACHINE
|
| 6 |
|
MOVE SOLUTION VALVE LEVER TO ON POSITION
|
| 7 |
|
LOOSEN THE HOSE CLAMP SCREW TO LOOSEN THE HOSE CLAMP
| Screwdriver-flat tip |
|
|
| 8 |
|
SLIDE THE HOSE CLAMP DOWN ON HOSE (SAVE THE HOSE CLAMP)AND PULL TO REMOVE HOSE
|
| 9 |
|
IF WATER COMES OUT OF SOLENOID VALVE WHERE THE HOSE WAS REMOVED, FLOW IS GOOD. MOVE SOLUTION VALVE LEVER TO OFF POSITION
|